M.2 NVME to USB-C 3.1 GEN2 10Gbps Enclosure
- Support NVME M.2 SSD(Key M), not support SATA-based M.2 SSD(Key B/B+M)
- Support 4 Form Factor: 2230/2242/2260/2280mm
- Aluminum shell, silver color
- Dimension: 10.3*4.5*0.9cm
- Screw installation
- LED indicates the status of the SSD
- Support UASP on Windows and Mac
- Support TRIM, S.M.A.R.T on Windows, but not Mac
- Compatible with Windows/Mac/Linux, Plug and Play, No Driver needed
- 10 pieces of Heat-conducting Silica Gel Pad for heat dissipation

Compatibility
- Support NVME M.2 SSD(Key M), not support SATA-based M.2 SSD(Key B/B+M)
- Support 4 Form Factor: 2230/2242/2260/2280mm
- Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type.
- Support Intel Optane SSD 800P Series
- Support Intel SSD 760p Series
- Support Intel SSD 660p Series
- Support Intel SSD 600p Series
Note: Please make sure your NVME M.2 SSD before playing the order

JMS 583 Chip
It is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device. The USB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate. Meanwhile, the downstream port of the JMS583 is compatible with storage device with PCIe interface, such as SSD. The PCIe port is compliant with PCIe Gen3 x 2 specifications.

Package:
- Scorpio NVMe Enclosure (SSD not included);
- USB Cable;
- 10 pieces of Heat-conducting Silica Gel Pad for heat dissipation
To be noted:
- Please remove the transparent protective films of Silica Gel Pad before using otherwise it will reduce the heat conduction effect;
- Silica Gel Pad is Low Viscosity, will not cause damage to SSD.