We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / M.2 Enclosure / NVMe Enclosure

GLOTRENDS M.2 22110 NVME Enclosure for M.2 Key-M NVME SSD

Model# Sagittarius
1) 22110 NVMe enclosure with USB C port;
2) JMS 583 Chip;
3) 2230/2242/2260/2280/22110 form factor;
4) USB C to C and USB C to A cable included.
    Please select the information you wantX
(1001 available)
Or buy on other website:
Buy At Amazon US
  • Description
  • Reviews

M.2 NVME to USB-C 3.1 GEN2 10Gbps Enclosure


  • Support NVME M.2 SSD(Key M), not support SATA-based M.2 SSD(Key B/B+M)
  • Support 5 Form Factor: 2230/2242/2260/2280/22110 mm
  • USB-C 3.1 GEN 2 10Gbps interface, USB-C to A cable (10Gbps) included


Note: To reach 10Gbps speed, make sure your PC/laptop port is USB 3.1 GEN2 10Gbps. If USB 3.1 GEN1 or USB 3.0 (Blue color) port, it would be 5Gbps at max.


  • Aluminum shell
  • Screw installation
  • LED indicates the status of the SSD
  • Support UASP on Windows and Mac
  • Support TRIM, S.M.A.R.T on Windows, but not Mac
  • Compatible with Windows/Mac/Linux, Plug and Play, No Driver needed
  • 10 pieces of Heat-conducting Silica Gel Pad for heat dissipation


  • Support M.2 NVME SSD(Key M), not support SATA-based M.2 SSD(Key B/B+M)
  • Support 5 Form Factor: 2230/2242/2260/2280/22110mmS
  • Support Samsung PM963, PM983, 983 DCT, etc.
  • Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type.S
  • Support Intel Optane SSD 800P SeriesS
  • Support Intel SSD 760p SeriesS
  • Support Intel SSD 660p SeriesS
  • Support Intel SSD 600p Series


Note: Please make sure your NVME M.2 SSD before playing the order


JMS 583 Chip

It is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device. The USB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate. Meanwhile, the downstream port of the JMS583 is compatible with storage device with PCIe interface, such as SSD. The PCIe port is compliant with PCIe Gen3 x 2 specifications.



  1. Sagittarius NVMe Enclosure (SSD not included);
  2. USB C to C Cable and USB C to A Cable;
  3. 10 pieces of Heat-conducting Silica Gel Pad for heat dissipation.


To be noted:

  1. Please remove the transparent protective films of Silica Gel Pad before using otherwise it will reduce the heat conduction effect;
  2. Silica Gel Pad is Low Viscosity, will not cause damage to SSD.
Average rating:
Share your thoughts with other customers
Write a review
Message Us