GLOTRENDS NVME-A&C 2 in 1 M.2 NVME to USB C and USB A Adapter Enclosure for NVME M.2 SSD(Key M),Trim UASP S.M.A.R.T Support
Work with NVME M.2 SSD (Key M), apply to 2230/2242/2260/2280mm. Not Support SATA-based M.2 SSD
2 in 1 Innovative Design: USB-C 3.1 port up to 10Gbps (compatible with thunberbolt 3), USB-A 3.0 up to 5Gbps.
JMS 583 chip, TRIM and UASP support; Compatible with Windows/Mac/Linux/XBOX/PS4, easy to setup, no driver required.
Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type. NVMe M.2 SSD offers enhanced bandwidth, low latency, and power efficiency, perfect for tech enthusiasts, high-end gamers, and 4K & 3D content designers
USB-C 3.1 GEN 2 interface, up to 10Gbps (make sure your PC/laptop is USB-C 3.1 interface), compatible with thunderbolt 3 (only reach 10Gbps at most)
USB-A 3.0 Interface, up to 5Gbps
Aluminum shell for heat dissipation
Silicone protection case for port protection, Anti-collision, dust-proof
LED indicates the status of the SSD
Support TRIM and UASP
Compatible with Windows/Mac/Linux, Plug and Play, No Driver needed
2×10 pieces of Heat-conducting Silica Gel Pad for heat dissipation
Support M.2 PCIE NVME SSD
Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type.S
Support Intel Optane SSD 800P SeriesS
Support Intel SSD 760p SeriesS
Support Intel SSD 660p SeriesS
Support Intel SSD 600p Series
Not support M.2 SATA SSD;
Not support 2230/2260 size M.2 SSD
2 in 1 Design
USB-C 3.1 port, up to 10Gbps speed;
USB-A 3.0 port, up to 5Gbps speed.
JMS 583 Chip
It is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device. The USB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate. Meanwhile, the downstream port of the JMS583 is compatible with storage device with PCIe interface, such as SSD. The PCIe port is compliant with PCIe Gen3 x 2 specifications.
Note: To reach 10Gbps speed, you need to purchase USB-C to C 3.1 Cable separately. Make sure your PC/laptop has USB-C GEN 2 interface.
Conditions of TRIM SSD
TRIM-enabled SSD performance does not degrade in long time use, and keeps it (nearly) as fast as new.
TRIM-enabled commend only work under windows, not support Mac OS;
SSD support TRIM-enabled commend.
To be noted: TRIM only works under NTFS, no FAT 32.
Remove the protective film of 10 small square silica gel pad
Put the small square silica gel pad on the surface of SSD chip/flash
Insert SSD into PCB board
Fix the SSD to PCB board with screw
Secure the case with 4 screws as picture shown
Put on silicone protection case
High quality CD screw ensure repeated screw/unscrew operation.
In order to improve product quality, we pay attention to every detail.
4 screws for case securing
screw kits for PCB board securing
2×10 pieces of square Heat-conducting Silica Gel Pad