2-Bay M.2 (NVME and SATA) to USB-C 3.1 GEN2 10Gbps Enclosure
- Support M.2 PCIE NVME SSD(Key M)
- Support M.2 SATA SSD(Key B/B+M)
- Support 4 Form Factor: 2230/2242/2260/2280mm
- USB-C 3.1 GEN 2 10Gbps interface, USB-C to C cable (10Gbps) and USB-C to A cable (10Gbps) included
Note: To reach 10Gbps speed, make sure your PC/laptop port is USB 3.1 GEN2 10Gbps. If USB 3.1 GEN1 or USB 3.0 (Blue color) port, it would be 5Gbps at max.
- Aluminum shell
- Screw installation
- LED indicates the status of the SSD
- Support UASP on Windows and Mac
- Support TRIM, S.M.A.R.T on Windows, but not Mac
- Compatible with Windows/Mac/Linux, Plug and Play, No Driver needed
- 2x10 pieces of Heat-conducting Silica Gel Pad for heat dissipation

Innovative 2-in-1 design
Innovative 2-in-1 design provide 2 bays for M.2 NVME SSD and M.2 SATA SSD respectively. You will feel free to use any kinds of M.2 SSD, or both of 2 kinds M.2 SSD at the same time.
Support M.2 NVMe SSD (Key-M):
- Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type.
- Support Intel Optane SSD 800P SeriesS
- Support Intel SSD 760p SeriesS
- Support Intel SSD 660p SeriesS
- Support Intel SSD 600p Series
Support M.2 SATA SSD (Key-B/B+M):
- Support Samsung 860 EVO/850 EVO/Crucial MX500/Crucial MX300/WD Blue 3D NAND, etc.

Separate PCB board with different Chip
JMS 583 Chip for NVMe to USB Adapter:
- It is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device. The USB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate. Meanwhile, the downstream port of the JMS583 is compatible with storage device with PCIe interface, such as SSD. The PCIe port is compliant with PCIe Gen3 x 2 specifications.
VL716 Chip for M.2 SATA to USB Adapter:
- VL716 is a high performance, low power single chip USB 3.1 to SATA 6Gb/s bridge controller with USB type-C connector support designed for new generation external storage devices.

Package:
- Pisces 2-Bay M.2 Enclosure (SSD not included);
- USB C to C cable and USB C to A cable;
- 2x10 pieces of Heat-conducting Silica Gel Pad for heat dissipation
To be noted:
- Please remove the transparent protective films of Silica Gel Pad before using otherwise it will reduce the heat conduction effect;
- Silica Gel Pad is Low Viscosity, will not cause damage to SSD.